Screw plugs with cone magnet
Lock screws with cone magnet
Magnetic closure screws with a cone magnet provide almost 100% higher induction values compared to conventional magnetic screws. This means a higher filter performance, higher adhesive force for the trapped abrasion and higher magnetic stability. These magnetic screws are therefore particularly suitable where optimal filter performance is important.
The rinsing or sweeping off of the deposited abrasion is prevented by the magnetic barrier zone and by the high adhesive force.
The determination of the magnetic field height is possible by changing the magnetic dimension.
DIN 7604, DIN 908, DIN 910
| sku | length (mm) | diameter of cone magnet | adhesive force ca. (g) | magnetic stray field (mm) |
|---|---|---|---|---|
| DIN908-M14x1,5-L11 | 11,0 | 5,0 | 125,0 | 25,0 |
| DIN908-M16x1,5-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-M16x1,5-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-R1/4-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-R1/4-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-M18x1,5-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-M18x1,5-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-M20x1,5-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-M20x1,5-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-R1/2-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-R1/2-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-M22x1,5-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-M22x1,5-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-M24x1,5-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-M24x1,5-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-M26x1,5-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-M26x1,5-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-R3/4-L11 | 11,0 | 7,0 | 380,0 | 30,0 |
| DIN908-R3/4-L18 | 18,0 | 7,0 | 220,0 | 60,0 |
| DIN908-M30x1,5-L18 | 18,0 | 10,0 | 820,0 | 90,0 |
| DIN908-R7/8-L18 | 18,0 | 10,0 | 820,0 | 90,0 |
| DIN908-M33x1,5-L18 | 18,0 | 10,0 | 820,0 | 90,0 |
| DIN908-R1-L18 | 18,0 | 10,0 | 820,0 | 90,0 |
| DIN908-M36x1,5-L18 | 18,0 | 10,0 | 820,0 | 90,0 |
| DIN908-M38x1,5-L18 | 18,0 | 10,0 | 820,0 | 90,0 |
| DIN908-R1_1/8-L18 | 18,0 | 10,0 | 820,0 | 90,0 |
| DIN908-M42x1,5-L18 | 18,0 | 10,0 | 820,0 | 90,0 |
| DIN910-R1/8-L7 | 7,0 | 7,0 | 125,0 | 25,0 |
| DIN910-R1/8-L14 | 14,0 | 7,0 | 60,0 | 40,0 |
| DIN910-M14x1,5-L7 | 7,0 | 5,0 | 130,0 | 30,0 |
| DIN910-M14x1,5-L14 | 14,0 | 5,0 | 65,0 | 50,0 |
| DIN910-M16x1,5-L7 | 7,0 | 7,0 | 480,0 | 30,0 |
| DIN910-R1/4-L7 | 7,0 | 7,0 | 480,0 | 30,0 |
| DIN910-R1/4-L14 | 14,0 | 7,0 | 220,0 | 50,0 |
| DIN910-M18x1,5-L7 | 7,0 | 7,0 | 480,0 | 35,0 |
| DIN910-M18x1,5-L14 | 14,0 | 7,0 | 220,0 | 55,0 |
| DIN910-M20x1,5-L7 | 7,0 | 7,0 | 480,0 | 35,0 |
| DIN910-R1/2-L14 | 14,0 | 7,0 | 420,0 | 60,0 |
| DIN910-M24x1,5-L7 | 7,0 | 7,0 | 620,0 | 35,0 |
| DIN910-M24x1,5-L14 | 14,0 | 7,0 | 420,0 | 60,0 |
| DIN910-M26x1,5-L7 | 7,0 | 7,0 | 800,0 | 40,0 |
| DIN910-M26x1,5-L14 | 14,0 | 7,0 | 500,0 | 70,0 |
| DIN910-R3/4-L7 | 7,0 | 7,0 | 800,0 | 40,0 |
| DIN910-R3/4-L14 | 14,0 | 7,0 | 500,0 | 70,0 |
| DIN910-M30x1,5-L7 | 7,0 | 10,0 | 1.000 | 40,0 |
| DIN910-R7/8-L7 | 7,0 | 10,0 | 1.000 | 40,0 |
| DIN910-R7/8-L14 | 14,0 | 10,0 | 820,0 | 90,0 |
| DIN910-R7/8-L21 | 21,0 | 10,0 | 1.000 | 110,0 |
| DIN910-M32x1,5-L7 | 7,0 | 10,0 | 1.000 | 40,0 |
| DIN910-M32x1,5-L14 | 14,0 | 10,0 | 820,0 | 90,0 |
| DIN910-M32x1,5-L21 | 21,0 | 10,0 | 1.000 | 110,0 |
| DIN910-R1-L7 | 7,0 | 10,0 | 1.000 | 40,0 |
| DIN910-R1-L14 | 14,0 | 10,0 | 820,0 | 90,0 |
| DIN910-R1-L21 | 21,0 | 10,0 | 1.000 | 110,0 |
| DIN910-M36x1,5-L7 | 7,0 | 10,0 | 2.000 | 40,0 |
| DIN910-M36x1,5-L21 | 21,0 | 10,0 | 1.000 | 110,0 |
| DIN910-M38x1,5-L7 | 7,0 | 10,0 | 2.000 | 43,0 |
| DIN910-M38x1,5-L14 | 14,0 | 10,0 | 1.200 | 90,0 |
| DIN7604-M14x1,5-L7 | 7,0 | 7,0 | 120,0 | 30,0 |
| DIN7604-M14x1,5-L14 | 14,0 | 7,0 | 60,0 | 40,0 |
| DIN7604-M16x1,5-L7 | 7,0 | 7,0 | 480,0 | 30,0 |
| DIN7604-M18x1,5-L7 | 7,0 | 7,0 | 480,0 | 35,0 |
| DIN7604-M18x1,5-L14 | 14,0 | 7,0 | 220,0 | 55,0 |
| DIN7604-M22x1,5-L7 | 7,0 | 7,0 | 620,0 | 35,0 |
| DIN7604-M26x1,5-L7 | 7,0 | 7,0 | 800,0 | 40,0 |
| DIN7604-M26x1,5-L14 | 14,0 | 7,0 | 500,0 | 70,0 |
| DIN7604-M30x1,5-L7 | 7,0 | 10,0 | 1.000 | 40,0 |
| DIN7604-M30x1,5-L14 | 14,0 | 10,0 | 820,0 | 90,0 |
