Finishing in GR

  • with handle
  • no additional drill holes

Example: A-2000GR
magnetic system A series, with
handle, no additional drill holes Finishing in SB

  • with handle
  • with front-face drill holes for screw-on angles

Example: A-2000SB
Magnetic system A series, with handle
and additional drill holes on front-face.
The aluminium angle should be ordered
separately. Finishing in LB

  • with handle
  • with drill holes lengthwise for screw-on
    aluminium or steel angles

Example: A-2000LB
Magnetic system A series, with handle
and drill holes lengthwise for an aluminium
or steel angle. The angle itself should
be ordered separately. Finishing in NH

  • without handle
  • with 2 drill holes M16 x 1.5 for screw-on clamping devices

Example: A-2000NH
Magnetic system without handle, with drill
holes for max. 2 clamping devices.
The clamping device should be ordered
separately.

Versions

jetzt anfragen PDF
sku pillar max. clamping height (mm) jib lxwh (mm) Fixing column Fine thread (mm)
mit Gelenkspindel
NH-25100GR16 25,0 100,0 230x40x20 M16 x 1,5
NH-25150GR16 25,0 150,0 230x40x20 M16 x 1,5
NH-25200GR16 25,0 200,0 230x40x20 M16 x 1,5
NH-25250GR16 25,0 250,0 230x40x20 M16 x 1,5
NH-25300GR16 25,0 300,0 230x40x20 M16 x 1,5
NH-25350GR16 25,0 350,0 230x40x20 M16 x 1,5
NH-25400GR16 25,0 400,0 230x40x20 M16 x 1,5
NH-25500GR16 25,0 500,0 230x40x20 M16 x 1,5
mit Gummi-Druckstück
NH-25100GU 25,0 100,0 230x40x20 M16 x 1,5
NH-25150GU 25,0 150,0 230x40x20 M16 x 1,5
NH-25200GU 25,0 200,0 230x40x20 M16 x 1,5
NH-25250GU 25,0 250,0 230x40x20 M16 x 1,5
NH-25300GU 25,0 300,0 230x40x20 M16 x 1,5
NH-25350GU 25,0 350,0 230x40x20 M16 x 1,5
NH-25400GU 25,0 400,0 230x40x20 M16 x 1,5
NH-25500GU 25,0 500,0 230x40x20 M16 x 1,5
« Back